I、Description: HBSP Series RF Admittance Level Switch is a new type level meter, is the replacement of capacitive level meter. Using rf admittance technology, the foreign anti adhesion circuit design, can detect the true physical position,at the same time,eliminate the false level signal adhesion and hanging around the probe.We also adopt foreign advanced SMT design and production technology,make the electronic circuit technology parameter more stable and reliable,even longer service life.The level switch can be used on liquid material,massive,granular,powder maerial level control or the upper and lower level alarm.Suitable for the bad environment such as high temeprature and pressure,strong corrosion and dust.Is widely used in metallurgy,petroleum,chemical industry,light industry,coal,cement,food and other industries.
II、Features: 1.Strong commonality: can be applied to all kinds of conductive and non-conductive medium measurement, such as liquid, viscous,granules, powder and fly ash. 2.Anti-adhesion: use the patented anti-adhesion circuit, can eliminate the false signals due to the material adhesion. 3.Output form:double pole double throw output, at the same time have a lamp display output state, and have 0 to 30 seconds delay function. 4.Maintenance free:no moving parts in the detection process,no maintenance.
III、Technical Parameters: 1.Work Environment: Temperature -30~70℃ ,Humidity≤90% 2.Supply Voltage: 220V AC 、24V DC 3.Power consumption:≤3W 4.Output Signal: Two groups relay doule pole doule throw, 10A,115VAC or 26VDC(Resiistive) or 5A,220VAC 5. Sensitivity:0.5pf~750pf 6.The installation structure: structure and sensor integration 7.The probe part:304/316/316L/teflon 8.Install the connector:1"pipe thread or flange connection 9.Electrical Interface:M25×1.5 10.Protection Class: IP65 11.Range of application:powder, block, granular and liquid 12.Output delay:Adjustable output delay within 0 to 30 seconds 13.Fault alarm: The upper or lower limit,the scene is adjustable 14.Power failure protection:Normally open or closed, the scene can be switched. 15.Operating pressure:0~2Mpa 16.Operating Temperature:-184℃~260℃(Above 260℃ we can choose the other high temperature probe)
|