I、Description：
HBRD guided wave radar level meter is based on the electromagnetic wave transmission and reflection travel time to developed a kind of level meter.The director radar is based on the time schedule instrument,radar wave running at the speed of light,running time can be transformed into level signal by electronic parts.The probe sends out high frequency pulse and along the cable or bar type probe to transmit.When pulse met the material surface was reflected back and accepted by the receiver in the instrument,transformed the distance signal into material level signal.Is a kind of short range level meter for liquid and solid,it is not influenced by the changing process conditions, the high temperature,high pressure and steam.Is widely used in chemical industry,metallurgy,petroleum etc.

II、Specification：
Can measure any medium of the dielectric constant is greater than or equal to 1.4
Suitable for measuring the viscous liquid or temperature and pressure change occasion
Suitable for measuring the apparent volatile gas medium
Used for foam,hanging wall and scale,surface wave,bubble or boiling,high-frequency loading and low level working condition
Dielectric constant or proportion change medium condition.
Output signal at 4~20mA/HART
Used for solid particles,powder medium
Medium of dust float in the sky

III、Technical Parameter：
Maximum range: 6m
Measurement Accuracy:±1mm
Procedure linkage: Thread, flange
Detection of Components: SS316L /PTFE
Process Temperature:-40-250℃
Process pressure: -1.0-20bar
Frequency Range: 100MHZ-1.8GHZ
Anti-explosion/protective level: Exia IICT6/IP67
Signal output: 4…20mA/HART(Two lines)